E-SPECIAL DARK SUNBURST (sold)

The semi-hollow body and three-piece neck of the E-Special Dark Sunburst are completely hand carved from solid flame maple. The body is trimmed with a seven-ply binding. Both the top and back are beautifully book matched. The body width of this model is 15.75'' / 40cm.

This model has no inlays. Instead, little dots on the side of the neck help you orientate. The nickel Schaller* hardware gives the guitar a clean and sharp look.

String spacing can be adjusted on the Schaller Roller Bridge. In combination with the Schaller Tailpiece it provides an excellent sustain and accurate intonation. The Free-Way 3x3 – 05 Six position toggle switch allows both humbucker and single coil out of phase sounds. 1, 2, 3) standard humbucker sound, 4) out of phase, 5) neck/bridge singe coil, 6) bridge single coil.

  • The tops, backs and necks of our guitars are completely carved by hand, using exclusively premium solid tone woods with outstanding tonal quality. Our guitars are built from one piece, allowing the wood to vibrate more freely, producing a more complex and dynamic sound.

    The construction of our semi-acoustic guitars - all of which are equipped with a square center block at the bridge position - eliminates all possible feedback problems entirely while maintaining its acoustic properties. The center of the top maintains its original thickness, while the rest of the wood is carefully carved away by hand. In this way, there is no tension on the top and therefore there is no tendency to bend and/or deform over time. This method eliminates the need for a center block that covers the entire body length of the guitar needed for stability and to avoid feedback.

    Every guitar we build has a completely unique look. The hand polished nitro-cellulose lacquer highlights the individual character of the grain, while maintaining the sound characteristics of the wood.

 

SPECIFICATIONS

Design: Semi Acoustic, hand carved
Top: Solid Maple, hand carved
Back & Sides: Solid Maple, hand carved
Solid Center Block: At the Bridge/Tailpiece position
Body Thickness: 2'' / 50.8 mm
Body Width: 15.75'' / 40cm
Binding: 7-ply, White/Black
Neck Material: Maple, hand carved
Neck Build-up: Three-piece Set Neck
Neck Shape: C
Head stock: Ebony overlay
Neck-Headstock angle: 15°
Logo: Dejawu, mother of pearl
Fret board: Ebony
Fret board Radius: 12'' /16'' compound
Number of Frets: 22
Fret board Inlays: No inlays, dots on the side
Nut type: Bone
Nut width: 1.77''/ 45 mm
Width at Last Fret: 2.26'' / 57.4 mm
Scale: 25'' / 63.5 cm
Pickups: Häussel* P90 1953
Pickup Rings: Standard (Handmade ebony rings available at extra cost)
Switch: Free-Way* Switch 3 x 3 – 05, Six positions, 1, 2, 3) standard, 4) N/B in series in phase, 5) N/B in series out phase, 6) N/B parallel/Out phase
Controls: 2x Vol, 2x Tone
Knobs: Schaller Strat Knobs
Bridge/Tailpiece: Schaller* Roller bridge + Tailpiece
Tuners: Schaller M6 Locking Tuners
Strap Button: Schaller strap locks + leather strap
Finish: Nitrocellulose, Hand polished
Color: Dark Sunburst
String Gauge: D’Addario* EXL 110
Case: Harvest* Leather Bag
Weight: 3.1Kg

*The mentioned companies are not affiliated with Dejawu Guitars.